GDI User Defined Injector Flow Testing

We will clean the injectors ultrasonically and we will POWERFLUSH them first.

This test will report how the injector flowed with your spec, you can determine if it will work for you. Indispensable tool for tuning needs.

CUSTOMER PROVIDES FOLLOWING GDI PARAMETERS
- The Pressure in Bar or PSI
- Microseconds to open
- How many Strokes/Frequency

RESULTS PROVIDED AS FOLLOWS
- Standard GDI graphical Report with injector flow corridor

For more detail on GDI Testing see our GDI Testing Section

For more detail on GDI Testing see our GDI Reports Section

*Custom GDI testing based on cc/min and rpm are coming soon.

Fuel flows in, fuel flows out. It is measured differently but you can convert it as long as you can derive a few measures.

CUSTOMER PROVIDES FOLLOWING GDI PARAMETERS
- cc/min target
- +/- variance on either side of target (flow corridor)
- Microseconds to open to start
- RPM point
- The Pressure in Bar or PSI
We will adjust parameters to see if we can make the injector hit your target and report the specs needed.

RESULTS PROVIDED AS FOLLOWS
- Standard GDI graphical Report with injector flow corridor
- Bar graph of min/max cc/min flow per injector